SALT LAKE CITY (AP) — A Utah driver turned on the semi-autonomous functions of her Tesla vehicle and then didn’t touch the steering wheel again for 80 seconds before slamming into a firetruck stopped at a red light last week, a summary of data from the car released Wednesday showed.
The National Highway Traffic Safety Administration has sent its special crash investigations team to the state, the agency said as details about the Friday evening crash became public Wednesday.
According to South Jordan police’s summary of technician findings, the 28-year-old driver had repeatedly enabled and disabled the Autopilot features of her Tesla Model S throughout the course of her drive. She took her hands off the wheel more than a dozen times, twice for more than a minute each.
The driver re-enabled Autopilot 1 minute and 22 seconds before the crash, let go of the wheel 2 seconds later and then didn’t touch the wheel again before hitting the truck at 60 mph. She had previously told police that she had engaged the system and was looking at her phone to compare route maps when the accident occurred.
The driver, who suffered a broken foot in the accident, has not been identified. She was issued a traffic infraction for failing to keep proper lookout.
The driver of the firetruck was checked for whiplash injuries but did not go to the hospital.
In a statement Wednesday, Tesla said that drivers are repeatedly warned to keep their hands on the wheel and maintain control of their vehicle at all times.
“Tesla has always been clear that Autopilot doesn’t make the car impervious to all accidents,” the statement said. South Jordan police reiterated that drivers of semi-autonomous vehicles must remain alert and in control of the vehicle at all times.
Tesla’s Autopilot relies on a system of radar, cameras with 360-degree visibility and sensors to detect nearby objects and perform basic functions such as parking and steering.
The features include emergency braking, which Tesla advertises as being able to “detect objects and automatically apply brakes to help avoid or lessen impact.” Tesla says the system is not designed to avoid a collision and warns drivers not to rely on it entirely.
It’s unclear if that system activated before the Utah crash. According to the summary released by police, the driver pressed on the brake herself “fractions of a second prior to the crash” and the vehicle had not slowed down from the speed she had set for cruise control.
The Utah accident is the latest incident involving an autonomous or semi-autonomous vehicle that has prompted scrutiny from federal regulators.
The NHTSA and the National Transportation Safety Board are investigating a March crash involving a Tesla Model X in California where the driver was killed. The Autopilot system was engaged in that crash. Also in March, an Arizona pedestrian was killed by a self-driving Uber car with a backup driver behind the wheel.
The NTSB said it has not opened an investigation into the Utah crash.
Written by JULIAN HATTEM, Associated Press
Email: [email protected]
Twitter: @STGnews
Copyright 2018 The Associated Press. All rights reserved. This material may not be published, broadcast, rewritten or redistributed.
There is a lot about Tesla cars that is downright amazing. But this is such a straight-forward accident! How on earth did the Tesla miss that big truck at a complete stop directly in front of it in broad daylight? There are a bunch of other Tesla crashes that are easier to dismiss, but this is the lowest rung on the ladder and the software / hardware still got it wrong. I think I’ll wait a few more years before dreaming about owning a Tesla again…
I couldn’t imagine using auto pilot I love driving too much but even if I did use it I only trust electronics and machines so much I’d keep an eye out still. Only electric car that actually looks good though.
Tesla better start giving intelligence tests before selling a car.
I agree hiker75…………